Nothing can be more stressful than vacating a rental property. From packing all household belonging to moving heavy furniture, you need to manage everything on your own. Apart from this, make sure that the leased property is in pristine condition during the final inspection of your landlord.
Many tenants in Gold Coast lose their bond money due to lack of cleaning. If you are also a tenant and want your full bond amount back, then focus on achieving sparkling results after sprucing up the property.
It is your responsibility to
maintain the property and remove all the dust, dirt, stains, grease, grime, mould and mildew from each and every corner of the premises using the best methods.
However, sometimes, it becomes difficult to clean, and that’s where you need professional assistance for a thorough end of lease cleaning in Gold Coast. They will come to your place with all the necessary tools and products to get the job done without giving you a hint of stress.
If you are not hiring professionals, then have a look at the following end of lease cleaning tips and get your full bond back.
Let’s Get Started!
1. Create a Cleaning Checklist
Property managers or agents follow the Property Condition Report during their thorough inspection. In fact, professional
end of lease cleaners in Gold Coast also follow the pre-approved checklist to pass the property inspection.
So, it is advised to create a complete end of lease cleaning checklist and inspect those areas that need repair or have been stained. These may need a handyman’s expertise.
The checklist will help you clean the property from top to bottom while keeping your tasks on track- which is good if you are doing without any professional assistance.
2. Arrange all the Necessary Cleaning tools
Cleaning a house is not an easy job. You need the right set of tools and products to bring back the lost shine of carpets, countertops, floors, bathroom walls and much more. So, it is good to invest in good cleaning tools, including:
- A broom,
- Microfiber cloth,
- Sponges,
- Cleaning brushes,
- A mop and bucket
- A vacuum cleaning Machine
- All-purpose-cleaning agent (White Vinegar, Baking Soda and Warm Water)
- Magic Erasers
- Toilet cleaner, etc.
Tip: Instead of using chemical-based cleaning products, use environmentally-friendly ones that are available at home such as vinegar, salt, lemon, baking soda, etc.
3. Don’t Overlook Light Fittings & Fixtures
Light switches, light bulbs and ceiling fans are the most overlooked areas when it comes to performing end of lease cleaning. Landlords and property managers pay close attention to these areas, so make sure remove dust, dirt and grime using a clean microfiber cloth. For tough stains, you can use all-purpose cleaner and wipe off the surface.
4. Window Cleaning is Must
Many tenants forget to clean their dirty windows at the end of the lease cleaning process. If you want to make your rental apartment looking fresh, then let the sunlight flood through crystal clear windows.
Instead of using market-based cleaning products, you can apply vinegar and hot water solution on the window glass after
removing dust and debris. You can use the squeegee to wipe off the window glass from top to bottom. Don’t forget to clean window sills, frames, edges and blinds.
Tip: It is recommended to clean windows when there is no direct sunlight and make sure you leave no streaks behind. So be careful.
5. Clean and Disinfect your Kitchen
A kitchen is considered as one of the dirtiest areas in your property. Landlords keep a close watch on different spots of the kitchen such as sink, countertops, stovetop, cabinets and kitchen appliances.
So, get rid of oil spills, stubborn stains, built-up grease and grime from different surfaces in your kitchen. Make sure you clean according to the checklist as it can help you focus on each and every corner of your kitchen during the cleaning process.
Do not forget to disinfect the high-touch areas of your kitchen using an alcohol-based cleaning agent or disinfectant.
Tip: Hire professional oven and BBQ cleaners in the Gold Coast if you are not able to clean it thoroughly. They use natural cleaning products to give you sparkling results.
6. Clean the Bathroom
Soap scum, calcium and rust stains, mould and mildew on different surfaces of your bathroom need to be treated before the final inspection by your landlord. You should use the best cleaning products to clean walls, tiles, showerhead, glass door, bathtub, floors, faucets, sink and toilet seat.
Make sure you remove hard water stains and mineral deposits from your bathroom surfaces using a scrubber and a natural cleaning agent. You can also use magic erasers to treat tough stains and built-up debris.
7. Carpet Cleaning
Carpets and other floor coverings need regular cleaning and maintenance, especially if you are living in a rental property. Give your delicate carpets a refreshing look by vacuuming cleaning and steam cleaning.
Vacuuming is important to remove dust, food particles, pet hair and dead skin accumulated deep inside the fibres of your carpet. On the other hand, spot or steam cleaning helps you get rid of tough stains, spills without any discolouration or damage.
You can also hire professionals who can guarantee a deep carpet clean and prolong its life.
Conclusion
Preparing rental premises for final inspection is a must for the quick and easy retrieval of bond money. These tips will help you transform a dirty property into a clean and sparkling space. You can also hire professionals for the best end of lease cleaning in the Gold Coast to pass the inspection without any stress.
