How to Remove Rust Stains From Toilets, Tubs, and Sinks
People often witness stubborn rust stains on their sink, toilet, bathtub or shower pan and link it with a problem in plumbing. However, these stains aren’t necessarily the effect of rust problems in the plumbing system. Any water that has a high iron content can also be responsible for such stains, even if the water appears and taste normal and clear.
To tackle such stains at the end of tenancy and to get the bond money back in full, people often contact professionals for a thorough end of lease cleaning in Gold Coast,
as they have all the modern equipment and effective cleaning solution for the task. However, it is also possible to clean it using DIY methods. Here is a list of such techniques that can be used to remove rust stains from toilets, tubs, and sinks. Let’s have a look:
How to Remove Rust Stains?
Various factors decide your success at removing rust stains. These factors include material of the surface (acrylic, porcelain
, or enamel), for how long the discolouration has been there, and so on.
For instance, in permanent staining, the rust colour may have permanently engraved itself into the porcelain, thus it will be impossible to remove. Before you try to follow any of the methods listed below, you should conduct a spot test in an unnoticeable area of the sink, toilet or tub to prevent any damage. Let’s have a look at the rust stain removal options:
Lemon and Salt
You can use both fresh lemon juice and bottled juice. Take the juice and add salt in it to form a paste and then apply the wet paste on the stains. This solution is not only perfectly suited for flat surfaces, but also useful in the toilet bowl, but the application can be a little tricky. This solution is also effective to get rid of musty smell in your house
Once you have applied the paste, allow the solution to settle for a couple of hours or if possible, overnight. After that, use a toothbrush or microfiber cloth to scrub and finally rinse with clean water. If the stains are still visible, contact end of lease cleaning in Gold Coast as they are aware of the latest cleaning techniques and have effective solutions.
A pumice stone or stick is a fantastic option for cleaning rust stains from porcelain, but it is not recommended if you have fibreglass. All you need to do is to wet the stone/stick and then apply sufficient elbow grease to rub away the stain efficiently.
As you start the process, the dampened stone will quickly create a paste that will help in the cleaning procedure by pulling out the stain. Once you are done with the scrubbing, use clean water to rinse the area.
Baking soda is also an excellent option to remove rust stains from toilets, tubs, and sinks. Its easy availability and effectiveness make it a popular cleaning solution for mould and mildew
as well. All you need to do is to prepare a thick paste using baking soda and water and then apply it to the affected area. Leave the dough overnight to settle down and then use a toothbrush or microfiber cloth to scrub. At last, rinse with clean water.
Sometimes, all you need is a standard kitchen sponge to lift away light rust stains. However, there are different versions of this product that are mainly designed to tackle tough stains on tubs and toilets.
This is considered as an excellent option because no chemicals are involved in it and high-quality scouring pads can be reused several times. Thus, these features make it one of the best eco-friendly options.
Commercial Stain Cleaners
The market is flooded with cleaning products that are specially formulated to remove tough stains, including rust. But you need to avoid products that contain bleach because such products make the situation worst.
Before you choose any commercial stain cleaners, it is advisable to contact end of lease cleaning in Gold Coast as they are aware of the products and equipment required to remove stubborn stains.
How to Prevent Rust Stains?
Different methods can be beneficial to prevent rust stains. They are as follows:
You should install a water softener or an iron filter. As bathroom rust is often the outcome of iron-rich hard water, installing such effective equipment will be very helpful in preventing future stains. And these filters are quite easy to install.
You should keep the metal cans away from the sink and bathtub. When in contact with water, cans that have metal rings at the bottoms like shaving creams, hair sprays, air fresheners, cleansers, etc. will quickly rust and leave a stain.
Keep the items in a separate cabinet that away from the sink and bathtub.
You should wipe down the sink and tub after each use. This will keep the things clean as it will not allow to settle down any iron residue.
Removing stubborn rust stains from toilets, tubs, and sinks don’t have to be a challenging task. All you need is basic cleaning equipment and knowledge of right cleaning techniques. End of lease cleaning is the most obvious option to remove such rust stain, but if you can take precautions, it would be a lot easier to remove such stains.