Safe & Effective Guide to Cleaning Air Ducts
The worse situation is that mould and mildew can also be harbour inside the vents due to humidity, leading to serious skin and eye allergies.
If you are prepping a rental property in Queensland for the final inspection, hire certified professionals for the best end of lease cleaning Gold Coast. Professionally-trained cleaners recommend cleaning dirty air dust at least once every six months for maintenance and healthy indoor environment purposes.
They come fully equipped with an REIQ-approved checklist which includes everything, including the air ducts of your heating and cooling systems.
If you want to know a safe, sound and effective guide to cleaning air ducts, consider the following tips and achieve a pro-like result.
Supplies You’ll Need to Clean Air Ducts
It is good to clean your air dust when you stock up on all the necessary supplies, including:
Make sure you wear a face mask, protective eyewear and rubber gloves to keep yourself away from mould, dirt, dust and pollens.
Step-by-Step Guide to Clean Air Ducts
Keep the following instructions in mind and clean air filters like a pro:
Step 1: Turn off the Appliance or Heating and Cooling System
Before cleaning, make sure you turn off the system to keep yourself safe throughout the process. It is good to leave the fan on for the first step, as the airflow will let you dislodge and move the grime and dust.
Step 2: Open the Air Duct
Depending on the grill or cover type of your air ducts, you will need to unscrew and take them down. Do this using a screwdriver or with the help of a power grill.
After taking the cover down, pull out the air filter and start cleaning.
Make sure you deep clean the air vents properly. If you are at the end of your lease, deep clean everything prepare everything when moving out from a leased property in Gold Coast.
Step 3: Cover the Air Vents
Do not forget to cover the HVAC vent using a clean rag. Make sure the system is turned off, and open the vents to place the rag over the inner sides. After that, close the vents to secure the dust rags.
Step 4: Turn on the Fan Mode
Let the fan system help you loosen and push dust and debris out the vent. Turn on the fan and operate it at the highest speed. Run it for at least 5 minutes. You can wait or bring all the necessary cleaning supplies close to the vent.
Turn off the fan mode and head towards the next step.
Step 5: Clean the Interiors
Consider the following steps to clean the inside of your air vents:
Step 6: Clean the Vent
Take a clean cloth and wipe down the remaining dust and dirt. Use a brush to get into the tight spaces in the grill and clean it thoroughly. This is an important step if you want to keep your vents clean.
Wash the grill thoroughly and screw them back.
Make sure you cover the vent again to prevent the spread of dust and debris.
You can also try quick and safe DIY cleaning tricks to maintain a tidy and organised home along with your air vents.
Step 7: Spruce up the Furnace and Fan
You need to turn off the fan, and now there is no other power running via the system. Unscrew the covers and check the blower system and fan.
Now, use a vacuum cleaner and get rid of visible dust and clean the hard-to-reach areas of your fan.
If there are still traces of mould and mildew, leave the top to the highly trained cleaners who offer bond cleaning Gold Coast.
Step 8: Replace the Air Filter
It is important to remove the old filter and replace it with a new one. You can replace the covers and turn your thermostat and fan on.
Give your air dust an annual clean with the help of this DIY guide and keep your indoor air pollution-free. If you are moving out of the leased property, hire professional end of lease cleaners in Gold Coast and secure the bond amount without letting you face any problem or conflict.